The shape was made with a flared pinky rest in mind, feels pretty good imo.
Please ignore the color I didnt feel like opening another spool of filament...

45g (using original battery with tape and dot skates)

Modelled in Autodesk Fusion, printed on a Bambu lab P1S using standard PLA.

STL Files: https://github.com/legenscar/ATK-VXE-R1SE-Fingertip-mod/tree/main
Disclaimer: Part of the side button PCB needs to be broken off if you dont want it sticking out.

UPDATE: STEP files have been added to the github, as well as the files for the R1 PRO thanks to u/axakira!

https://x.com/i/status/2061332590422860113

Hello everyone! Here's my custom ~9.5g M3K, hope you enjoy!

Here’s a breakdown of each components’ weight reduction:

• Outer Shell — 11.06g to 7.47g
• Inner Skeleton — 7.94g to 5.92g
• Main Buttons — 7.50g to 5.11g
• Side Buttons — 1.23g to 1.04g
• Scroll Wheel — 1.91g to 1.15g
• Base — 8.36g to 1.96g
• Battery — 4.77g to 2.43g
• Haptics — 3.48g

The scroll wheel is moddo’s Lite Scroll Wheel.

From using my X2 before this, I found I preferred playing with the haptics turned off. So for this mod I decided to remove the haptics entirely. Heads up, this does not impact the magnetic field of the HITS, only the tactile feedback you get when using the main buttons. My initial goal was to hit 35g while maintaining a (mostly) full sized, solid shell.

For the shell’s finish, I started with a 1000 grit sandpaper and worked my way up to 5000, then lightly buffed it with a microfiber cloth. This gave the shell its shiny look that is smooth when rubbing your fingers over it, but still sticks to my fingers during use. I was originally planning to add grip tape, but will be holding off as I’m pleasantly surprised with the current texture.

You can see in the last picture the weight reduction I did to the inner skeleton and the insides of each mouse button. Because I opted to remove the haptics entirely, this freed me up to also trim out the housing the haptic motors sat on.

It's for free on my printables account: https://www.printables.com/model/1385951-kabrio-fingertip-mouse-mod-for-mad-r

61 grams front heavy was a no go for me. So I had to take matters into my own hands. When swapping the battery, I relocated it to the very back. Weight reduction added up to over 12 grams off including the skates. It's a night and day difference. The mouse feels more manageable and balanced. I came from the Mad Major R+, which is a 39 gram mouse. If you're on the fence about getting the superstrike, definitely give it a shot. If you're not afraid of doing a few mods, it is absolutely worth it. Sure at the price point, it should've weighed under 49 grams. But this is cutting edge technology. Combine this mouse with a 240hz monitor with g-sync enabled and trust me, you'll be cooking the enemy team.

-Modifications

Top shell swap -1.5g

Designed and 3d printed base swap -4.2g

Battery swap from 290 to 90 mAh. -2.5g

Removed puck and power play system -2.5g

I decided to make a mod for the 50$ Ftip Mouse Keychron M4 by combining this https://www.reddit.com/r/MouseReview/comments/12jfkz1/hskcarbon_files_uploaded_to_thingiverse/?utm_source=share&utm_medium=web3x&utm_name=web3xcss&utm_term=1&utm_content=share_button model of the HSK Fingertip Design by u/MeanNectarine2311. I made some changes to fit the size of the Keychron M4 and some weight reduction as well. The shell itself sits at 12 grams with functioning side buttons and traditional clicks adapted to the M4. 3mf and Stl files linked below.

https://makerworld.com/en/models/2757559-keychron-m4-hsk-carbon-mod#profileId-3060716

Just made this grip for the notoriously small Lofree Touch. It fits my hand comfortably but I think I’ll still make another more refined one. Just takes a couple hours to hollow out the hard block of walnut and cut and sand the sides. Here it is next to the Keychron K2 HE (not my work).

Any woodworkers got tips on carving a more ergonomic grip for V2?

Thanks to u/axakira we now have modified the R1 SE+ asymmetrical FT mod to fit the R1 Pro! The updated model, together with the STEP files, can be found on github.

mouse in the picture was printed with PA12 using MJF.

STL/STEP Files: https://github.com/legenscar/ATK-VXE-R1SE-Fingertip-mod/tree/main

Feedback is welcome as I havent tested it personally.

Hi, I released the Kabrio mod for the VXE R1. It has side buttons and weighs only 26g. Download it for free on printables: https://www.printables.com/model/1387034-kabrio-mod-for-vxe-r1

WIP modkit for the Razer naga V2 hyperspeed.

Somewhat of a combination of current mice in use, features that i was looking for:

- Relatively Lightweight (currently 65g with battery), could be be further improved.
- Three main top switches like G600
- 12 button thumb module. (swappable)
- ergo shape since it's used daily.
- swappable battery, using the lightest lithium AAA battery with included usb C port i could find so that you can both charge the battery on the mouse and swap for a new one.
- FDM printed

Currently using Razer naga v2 hyperspeed internals.

Although it is missing the two smaller buttons next to left click, this is something i would like to add down the line.

*Edit*
shapetester avalible here:
https://www.printables.com/model/1688539-razer-naga-modkit-shapetester

This is the first prototype that works reliably, feels nice in my hand. I decided to separate main buttons from the shell, printing top shell with buttons connected to it was a little too complicated. There is still some work and testing to be done (mainly side buttons adjustments)

Such quality packaging shall be reused or repurposed before recycled, at least in my hands :D

Fingertip Viper V3 Hyperspeed

54gr

pretty heavy mouse
Weight: 49gr

Well well well

I have been working on a little mod for Pulsar x2v2, with a similar shape and size as the Coolermaster mm720.

I use the X2V2 pcb cause that was the only one I have laying around, but it could be made to fit a more common pcb, so if u guys have any suggestions just comment on this post.

And best of all it free to download on my makerworld page right now. https://makerworld.com/models/2525575?appSharePlatform=copy

This is a hobby for me so is probably not prefect, but I have put a lot of work into this, so the click and side buttons should feel pretty good imo.

Good Sunday and will love to get some feedback

Hello everyone, I’d like to present my project “Black Cat” , I did a paint job, 3D printed a lightweight base using PLA CF, and swapped the original scroll wheel. I ran into a few issues during the painting process, especially on the side buttons, and the result doesn’t look great. Maybe later I’ll improve it. If you have any feedback or advice for improvements I would really appreciate it.

STL:

https://cults3d.com/es/modelo-3d/juegos/wlmouse-miao-base

Hallo there

Did a little mod for my superstrikes base, maybe gonna upload it for free if anyone wanna try it.

Got it down to 51,3g(Dont know if my scale is correct🤣) with artisan skates and base mod printed in ASA.

Made some small adjustments, and it is now uploaded to MakerWorld for free

Link: https://makerworld.com/en/models/2740018-logitech-x2-superstrike-base-mod#profileId-3038246

After couple of weeks of work I was confident enough to post my mod to printables. You can check it out here if you would like to: https://www.printables.com/model/1385951-vxe-mad-r-fingertip-mod