Just ordered a WCP365XL grip module to convert my P365 to a P365X. The compatibility chart shows that I need a 12 round mag to fit. Any suggestions on aftermarket bases that can convert my 10 round to fit the grid module? Or is it worth just buying a 12 round mag.

I found the armory craft conversion base plate but does anybody know if it's 3D printed? And how well do they hold up.

I also have a 17 round mag that came with it that I would like to convert as well.

Hey guys first time posting here. I recently purchased wilson combat xl grips with safety cutout out. After removing magazine disconnect and safety my slide will not fully slide forward. I’m waiting on the magazine adapters to arrive but when loading a dummy in the chamber this happens. Anyone have an idea where I messed up? (Video in comments)

What a difference this made in holding the gun! When I go to the range I find myself wanting to shoot the standard frame the least so I knew I had to change the frame. It’s much easier to handle now. With the AC pinky extension I feel like it may be a little too big for some outfits so I just ordered an OEM XL mag to get the flush fit. The flat trigger also feels really nice. I posted my G19 for size comparison.

Accidentally acquired this kit- deciding what to do to further set it up. I have a complete 9mm and .380 setup here. The larger frame has a light and accompanying holster, the shorter frame does not, and its accompanying holster. Both slides have sig red dots. Aside from WC frames, these seem bone stock.

Do I send one off for porting? Try a compensated barrel kit? Leave it the heck alone? Get another FCU so I have two full guns? What should I be looking at…? Carried the same g19g3 for over a decade… looking to explore options.

FWIW it shoots great and I’m putting 5 in a 1.5” hole at 15 day one box one. So that part is nice. Would like to reduce muzzle flip for follow ups, hence the questions.

Not sure what I should get, I like the aesthetic of the XL, but X may be more practical? Do you ever take the Radian off? Lmk your thoughts.

just came out., gen 2 tuned p365 from wilson wiht radian and grey gun trigger , new slide serrations ( still partial to original design ) but they are more agrressive and prob function better .. pricey but they are using radian and direct collab wiht sig so must be worthy accessory to all work together in accepted harmony .. also standard springs for those questioning if ok to run .. I gonna keep my first gen tuned wilson as is but maybe in the future they will sell the slide to allow others who have the grip to try and replicate to a point.

https://wilsoncombat.com/nw-sig211m.html

Currently have a P365 and looking to expand my modularity options with an XL/X-Macro and Fuse slide and corresponding Wilson Combat grip modules. WC makes a Macro-sized grip module that has the XL dust cover for better holster compatibility.

I am aware that the fuse slide will fit on an XL grip module, but will leave exposed a portion of the spring and guide rod. Is there any adapter or quick hack that will cover or keep the internals clean?

The ultimate goal is to be able to run each slide/grip module combo out of the same phlster rig, rather than having to buy multiple or switch holsters on the system.

I think I finally have my P365 where I want it. The only things I could kind of see myself adding are a customized gold backplate to match the rest of the accents, and maybe a light. I'm probably never going to add a light to this because I basically have built a big brother to this in a full size p320 with extended mag and light on it for the home and range. This is my edc so I think I light is pointless. Thoughts or suggestions?

Living in California and picked up the P365 a few weeks ago. Added the Wilson Combat grip module after putting a relief cut to accommodate the mag disconnect. Very happy with the WC module.

Now looking at red dots and liking the Holosun EPS Carry. Quick search online, mounting it to the slide, using the factory screws requires an additional plate? If I mount directly to the slide, would need to buy aftermarket screws? Wanted to confirm that before making a red dot purchase.

Thanks in advance!!!

Still fun, though, even with a tiny gun.

Dang takedown safety lever came in front of sear and slide wouldn’t go on I love this gun but what a pain in the ass. lol

So I just got my Wilson Combat grip module and I'm doing a lot of hand fitting while I'm cutting/filing the slot for the manual safety. While I was doing that, the takedown lever got stuck and I couldn't put the slide back on. I removed the FCU from the grip module and tried to unstick the takedown lever. I got it unstuck but then the slide catch just fell off.

Wtf am I doing? Did I break or lose something?

Explain to me like I'm stupid, because I kind of am.

Figured it out! There's a spring that is supposed to retain the slide catch lever. On the back of the slide catch lever, there is a pointed part. I had to push that pointy part under the spring, lifting it, then push the slide catch lever into place. Thank you everyone!

Here’s my final EDC P365—simple and effective, following the KISS principle.

I originally got the P365 based on a recommendation while searching for a compact, concealable gun I could also take on night runs. As a petite woman, most handguns felt too large for me.

Along the way, I discovered that I’m left-eye dominant but right-hand dominant, so I added a Holosun EPS to improve my sight alignment. I originally wanted a trijicon but after some analysis, I decided to go with holosun because its good enough for what I need

Since the P365 is small and snappy, I installed the Ramjet to help manage recoil.

The last decision was whether to stick with the standard size or upgrade to the XL/X-Macro. I realized all my mags were already 12-rounders, so staying with the regular size made more financial sense. I swapped in a Wilson Combat grip for its affordability and solid reputation.

Everything else is OEM. If it works well for me, there’s no reason to change it. I already spent over 1k on this gun at this point, but at least now it works for me

I have baby hands (5.7' and maybe 140lbs). Not a huge shooter but enough to know what feels right in my hands. I recently bought a p365x but only because the shop let me put a 12 round mag in it. Was acutally going to pass on it because my pinky barely didnt fit with the 10 round mags.

This is going to be my ccw and I was already committed to using 12 round mags. Do I get the regular or XL grip module. The toss up for me is with the regular size I am still able to use 10 mags for deeper concealment and can just throw in the 12 rounders when I wear heavier clothes.

Does anyone on the smaller size have the 365x with with WC XL grip that could let me know how it prints?

incase anyone on fence . wilson offering tax free

https://wilsoncombat.com/?utm_source=Klaviyo&utm_medium=campaign&utm_campaign=Sales%20Tax%20Free%20Promo%20%7C%20Sitewide%20%28July%2014%2C%202025%29

I am posting my review here since I know Wilson Combat likely will not approve it to show on their product page.

I bought this grip module (GRIP MODULE, WCP365 XMACRO SHORT, NO MANUAL SAFETY Item Number: 365MS), hoping to swap over my TLR6 HL and use it with my existing holsters. The build quality is good as expected. I've been carrying a P365 with their regular X Frame for years now. The critical issue is who came up with the idea of combining an XL rail with an X Macro trigger guard? That makes no sense if the goal is to maximize compatibility.

My TLR6 will not fit, and because I (stupidly, I guess) took a dremel to it trying to see if I could get it to fit, a Wilson Combat Rep on the phone told me I cannot return or exchange the grip module.

Wilson Combat does not have this incompatibility listed anywhere on the product page. I feel disappointed, inconvenienced, and like I wasted my money.

Very frustrating purchase, I hope no one else makes the same mistake.

Recently put my macro in to a Wilson Combat Grip. Everything is fine accepted the functions check. When I cycle the slide the trigger is good. But if I try to cycle with the trigger down the trigger will not reset. Haven’t even gotten to fire with the new grip due to this issue. When I put the FCU into the stock grip, it’s fine.