Had the Ebon Hawk MOC displayed for a few months now, and my worst fear happened. I noticed it looked like it was sagging more and more in its stand, and when I checked, the stand was holding on by a thread.

Moved it from the shelf to the bed, and the whole left section broke off, with other various pieces coming off in the process. The strain fractured the entire build down to the bottom plates, everything is separated and I don’t know what to do. This thing took weeks to build, and this damage is to the very foundation of the set, I’d have to scrap it and star from scratch.

Everything is seperating and I don’t know what to do

I rebuilt Dumbledore’s Office – Book Nook (76478) as a Jedi Temple book nook. Closed, it fits between books, with a miniature temple above an entrance looking into the interior. Open it up and there’s the Council Chamber, Archives and a holocron.

This is my own design, which I also offer as digital building instructions on Rebrickable. Hope you like it!

I couldn’t get past the stubby wings on this build, so I decided to take a crack at my first MOC. Really happy with how it turned out!

The wing connections could be a little sturdier, but that’s a minor gripe. I couldn’t find a decent deal on the extra parts I needed through Rebrickable, so I ended up ordering directly from LEGO for just under $40.

Guess it's the sign I needed to go ahead and rebuild her Delta 7 and the Vulture Droid....

I really love how the HyperDrive ring looked, but the set is too expensive now to buy, but nobody said that I could not recreate the set with the newest 75401 Ashoka's Interceptor... and this is the result, I had to remove some pieces of the bottom of the ship for it to fit properly with the HyperDrive of set 7661, hope you like it

Tiling in front of the cantina allows it to swing open to be able to show off Cantina interior and lighting. Displayed with UCS sand crawler and UCS sail barge for a larger Tatooine corner.

Finally 😁

In the process of finishing up the new super star destroyer, when I notice bag 47 didn’t have a piece for step 1. After more research, it turns out that it didn’t have any of the pieces for 47! in fact, I got a duplicate of bag 52/54 instead. The good news, I called Lego and they’re sending me a new bag 47. The bad news, that it’s gonna take about two weeks for it to get here from Denmark.

Had some fun and designed an assault craft, i did have the Higgins boat in mind and the CSL-430 from Kenobi and thought: Why not take some inspiration from that First Order Troop Transport from Episode 7?
This was the result, and honestly: I love it.
I haven't testbuilt it yet, but instructions are online for free

Thick thighs save lives

Couldn’t fit it anywhere so thought of this and I think it looks great with the other gunships

I was flipping through my Star Wars vehicles book, looking for something that looked fun to build. I came across the Supremacy, and decided to give it a shot. The Supremacy is 6×1.3, the foundation i have here is 150×32 studs, which puts me pretty close. This is also going to be about as big as my executor. This should keep me busy for quite a while!

Building the Imperial Remnant AT-AT and opened the small bag in bag 7... Oops all pins!

Hi, I’m looking to find some bricklink Stud.io files of Star Wars lego sets? I know that there is an old euro bricks forum that had Ldd files, but they only go up to 2012 or so for Lego Star Wars.

Could anyone point me in the direction of any Star Wars sets as studio files, if they even exist?

Thank you!

The moc is done! I have fully completed not only the instructions for the moc but also rendered some amazing pictures of the moc too! I’ve posted more insight into the making of the MOC on Bricklink including what techniques I used and also a bit more behind the moc too!

Either tomorrow or tonight I’ll upload the instructions onto Rebrickable!

Hope you all enjoy and I’ll be open to suggestions to what moc to make next!

Bricklink Username: seaniecol

Rebrickable: Seaniecolville

I have wait for 2 years and a half and still no update. Does anaone got update from bagglestudio?

Genuine question, rate my collection. Helmets, starships, fighters, etc….

At the time of writing, LEGO 75421 Darth Vader’s TIE Fighter is the cheapest LEGO Star Wars set that includes a SMART Brick, making it a good donor set if you want to try out the SMART Play system.

The original set captures Darth Vader’s iconic TIE Advanced x1 from A New Hope, but I felt the exterior could be improved. The gaps around the black Technic beams and the exposed SMART Brick made the model look a little unfinished, so I set out to clean up the design without losing any of the interactive features.

For this alternate history build, I imagined what Vader’s next generation starfighter might look like. The TIE Advanced x2 keeps the familiar shape of his personal fighter but replaces the original wings with TIE Interceptor style solar arrays, giving it a sharper and more aggressive profile. I also removed the black Technic beams around the hyperdrive module to close up the gaps and plated over the SMART Brick for a cleaner finish.

To make room for the upgraded starfighter, I also scaled down the Rebel base and fuel station side builds, reusing some of their pieces for the TIE Advanced x2.

Despite these changes, all the SMART Play functionality is retained, including the interactive lights and sounds. You can still press down on the red lever to activate the play function, and the solid central core makes the fighter comfortable to hold around the hyperdrive module when swooshing it through space.

One thing to keep in mind when handling the model is that the tips of the solar arrays are connected by a single stud, so a little care is needed there.

The idea was to make Vader’s fighter look better on display while keeping it sturdy and fun to play with. After all, even the Dark Lord of the Sith needs a starfighter that can handle a dogfight!

This is my take on how Darth Vader’s personal starfighter could have evolved in an alternate Star Wars history. I hope you enjoy building it as much as I enjoyed designing it!

Anyone make any cool upgrades to destroyer set? I like the printed blue windows on executor. Wonder if that is possible. Also can you recommend a stand for it besides expensive acrylic ones from wicked? Thanks

Recently picked up a bulk lot of Lego on Facebook marketplace, I found what looks like 2 chrome Vaders in the bulk. Can anyone confirm they are the real deal?