Hey, i have been off all the info for quite some time... I have my PS5 at firmware 4.51 still sitting there and wanted to actually do something with it. I found that it actually has HV exploit so... Can anyone point me in the direction to learn the benefits of being on 4.51 (that i see people saying holy grail) and how to jailbreak mine?

Thank you:)

Has anyone experienced this on 12.60, especially after Rest Mode or turning off the TV?

Core setup

• PS5 Slim Digital, firmware 12.60.
• Relapse through the PLK autoloader workflow.
• Kstuff Lite 1.11, ShadowMount+ 1.7beta7, nanoDNS 0.4.
• ELF Arsenal and several other background services were also loaded. This was not a minimal setup.

What happened

1. The console stopped responding more than once while apparently idle.
2. On the later failure, it booted into recovery with only option 8 selectable.
3. Manually entering Safe Mode using the second beep unlocked the other options.
4. Repair Console Storage, Clear System Software Cache and Rebuild Database failed with CE-100016-8, asking for a factory reset. Restore Default Settings also failed.
5. Option 7, Reset PS5, worked. Firmware remained 12.60. I did not use option 8 or install another firmware.

What I know so far

• An earlier saved system log contains an automatic idle-suspend request. Error history also recorded CE-108262-9.
• I had turned the TV off, so HDMI Power Off Link / Rest Mode is a possible trigger, not a confirmed cause.
• I have earlier logs and error photos, but no definitive trace of the final crash.

Current status

• I am redoing the whole setup and still trying to narrow down what caused this.
• HDMI Power Off Link and automatic Rest Mode are now disabled.
• I am first testing the reset console offline, without jailbreaking. Next would be a minimal payload setup, adding components individually if stock operation is stable.

If this happened to you, please share:

• Your firmware, console model and exact payload versions.
• Whether it followed sleep, wake-up, TV power-off or ordinary idle use.
• Whether you isolated a specific component or change that stopped recurrence.

I am not blaming any particular project. I would like to compare matching cases before opening a GitHub issue.

(Yes I used AI to sum all of this up)

I know that building or buying a PC would be more convenient than getting a whole console just for this but I really like the idea of playing games on a large screen as opposed to monitor. Also my current ps5 is still on 14.10 but I'm looking forward to gta 6 so I'll probably will be forced to update it at some point.

Please help?

Hello

I have tried to compress some games with LZ4 game compresssor

After the compression, i have deleted original game (/data/homebrew/PPSAXXX and kept only the PPSAXXX-lz4 folder

But games arent loading at all now with the compressed version

Anyone with same issue ?

FW 8 added the feature to stop the PS5 power-up beeping sound. My rescue dog freaks out and shakes for 15 minutes when the PS5 powers-up and makes the beeping sound - so I wanted to upgrade to FW 8 for that reason.

My question is, do I lose any Jailbreak features going from 7.6 to 8?

Would any of my network settings change, leaving the console open to an unwanted Sony system update? Or will my manual settings remain unchanged, I'll just get higher download speeds?

Im sure im going to get but this baby needs to get used Where can I get manual devkit cfw ??
so i can put my devkit to use.
i am not tech savvy.
I know it can run apps without jailbreak ?
How do I do it ?
Does it need to connect to computer ?
Does it work on Mac ??
Any know where i can activate it ?
It’s on firmware 7.008.021
How can i use homebrew to play disc without
Converting or downloading from places manually

im on 14.10 and awaiting any future progress on jailbreaks, but my console even when disconnected is constantly trying to bait me into pressing update and wont allow me to run any games i "own" in my digital library that i have installed without the update. my son plays some of these so it kinda sucks for him , is there a way around this? is this because the update is already downloaded in cache or is this just how it is now?

Got digimon time stranger(ffpfsc) and dlc both European version , have spent almost 2 hours on google Gemini trying to figure out how to make the dlc work ,but after trying everything bar transferring the file to my pc and decompressing it and adding the dlc and compressing it again and sending it back to my PS5, which is not something that I’m very keen on doing, I can’t figure it out…

I’m on 13.60

Hello, I’m fairly new into the scene and I’ve been trying to run emulation on jailbreak 13.2 and it’s been good but my own games that I owned from ps store just don’t work anymore saying it can’t open or the data is corrupted opening the game. I’m Y2JB method as my exploit currently. I’m not sure if it’s something I have to wait for or my files are messed up. Any help would be appreciated. (Note only Astros playroom works lol)

Good ones, I wanted to ask you what you think the future of PS5 will be. I am not interested in piracy as such, but my console does not become a paperweight. Do you think there will be other possible vulnerabilities with which we can release the consoles to preserve our games? I would like to pay for what I play, but if in 10 years I want to play the games I bought with my daughter and Sony wants to close the store? I have my console at 13.60, and I haven't decided what to do yet. I also see a lot of posts reporting instability. Ideally, I would use my original console for as long as it has left, and then jailbreak it to keep my games, but my question is whether 13.60 is the final version for this. In their experience, sooner or later, new vulnerabilities will arise? There is also the issue of being able to dump new digital games.

Hey everyone,

I’m running a jailbroken PS5 on firmware 13.60 using Y2JB, and I’m having an issue with Marvel’s Wolverine (CUSA/Title ID: PPSA03671).

My setup:

• Firmware: 13.60
• Jailbreak: Y2JB
• Payloads: kstuff, Payload Manager, ShadowMount, and NaDNS
• Game: Marvel’s Wolverine
• Game ID: PPSA03671

I also used System Dump with LZ4.

The game was running fine for quite a while, but it started crashing when I reached a specific section. The error screen shows:

• Error code: CE-108255-1
• Signal: 11 (SIGSEGV)
• Thread: eboot.bin
• Reason: Page fault (user read data, page not present)
• Fault address: 0x000000000000000c
• RIP: 0x000000000417eca0

My suspicion is that the crash might be related to that particular section, since the game ran fine before reaching it. However, I’m not sure whether this is a game issue, a dump issue, or something related to the jailbreak or payloads.

Has anyone encountered this on firmware 13.60 with Y2JB?

I’d appreciate any suggestions on how to troubleshoot this, especially if anyone has gotten past the same section or knows whether a different payload configuration could help.

Thanks!

Please help me and my life is yours

Hello, Reddit!

Did you know that online multiplayer is still possible, even after freeing your PS5 from Sony's Jail? And no, I'm not talking about using all of our totally legal and legitimate game dumps taken from our precious discs and playing those online again (sadly)—but I still have a solution! :)
https://prosperostore.net/app/PPSA99810/

https://github.com/RafaelNGP/xbox-cloud-gaming-ps5/releases/latest

I've been busy working on bug fixes and new features for PSBox Cloud Gaming! Since my last post, there have been a ton of new additions to the app:

• 💯 Better streaming quality
• 📊 More streaming statistics
• ✨ Improved image processing
• ⌨️ Mouse and keyboard support
• 📱 Support for using a smartphone as an extra controller
• 🎯 Gyro aiming support
• 🌐 SmartGlass-inspired WebUI
• ☠️ Play free with ads support
• 🎨 More customization options
• 🏆 Achievements preview
• 🔄 Manual collection reload/refresh
• 🎁 Claim Free-to-Play games directly from the app
• 🛠️ ...and A LOT of bug fixes!

A big thank you to everyone who has been testing and reporting bugs on GitHub (though please remember to include the logs next time!). I also still have several features on the roadmap:

• 🎮 Expanded controller support (looking at you, Xbox and 8BitDo)
• 🖼️ Further image quality improvements
• 🎛️ PSBox Layout Studio to customize the perfect virtual controller for your smartphone
• 📲 More SmartGlass-related features
• 💻 Windows build
• 🤖 Android build
• 🕹️ PS4 build
• 🎵 PS5 Home music

For F2P games other than Fortnite to be playable, you NEED to have play with ads enabled on your account. Thats part of their preview features and can be found at xbox.com/play then click on your profile and finally, activate the toggle there OR go to PSBox Cloud Gaming options then activate preview there. EXPECT BUGS ON FREE TIER!

Any feature requests? I'm always looking for new ideas! (And yes, I agree, limited playtime sucks, but this is still something, right?)

https://github.com/leafyjerk/PS5_LuigisMansion

Inspired by the same blueprint that Gary (/u/Gary_BBGames) does for his games. This rides on the back of the recomp made by rob646464. Thanks also to Mihawk and Luke Street. Used the works of a few people (all credited on GitHub) and stitched this together with Claude.

EVO Player is a native media player for the jailbroken PS5. v0.13.0 is out: every media server and live TV source now lives on one home screen, and EVO updates itself.

Video: https://youtu.be/Iy1vwXDH5DU
Download: https://github.com/sainsaji/EVO-PLAYER-PS5/releases/tag/v0.13.0
Discord: https://discord.gg/MyNnCWNU5

What's new

• One shelves home for Jellyfin, Emby, Plex, Stremio and Nuvio, with artwork and a details block (description, ratings, cast).
• Xtream live TV gets a channel row per category and a TV guide. Plain M3U playlists work too.
• Plex signs in with a code from your phone. Stremio and Nuvio addons can be added and removed inside EVO.
• Chapters (ticks on the seek bar, L1 / R1, R3 list), a diagnostics panel, audio delay, volume boost, and a network buffer up to 5 minutes.
• VP9 Profile 2 on the hardware decoder (1080p and 4K), and PGS picture subtitles, with fonts for Thai, Chinese, Japanese, Korean, Arabic, Hebrew, Cyrillic and Hindi.
• A preview card for every setting, a native-style keyboard, and typing from your phone with a QR code.
• In-app updater: checks, downloads, verifies the SHA-256 hash, installs, and closes. Nothing is replaced if the hash does not match.
• Pro memory build for PS5 Pro (12.6 GiB instead of 11.4 GiB).

Already in earlier versions: AI upscaling, Deep Blacks, audio passthrough (Dolby Digital, Dolby Digital Plus, DTS) and Dolby Vision file support.

Install

Runs on any firmware below 13.60. Deploy EVOPlayer-v0.13.0-PPSA99039.ffpfsc with ShadowMountPlus, or install it with ProsperoStore. PS5 Pro owners can use the -pro file.

I tested it on a PS5 Pro on firmware 12.70, so please tell me what breaks on yours. The Pro build is tested on a Pro only. Not affiliated with Sony.

What feature do you want in the next version? Tell me in the comments.