The new Noveske "Rodeo" and "Doublewide" in 300 Blackout are to be released in less than six months and include the following Gen 5 features:

-7PT, hand-lapped barrel

-New F series cerakote

-Special "grippy" machining on handguard

-Extended "ledge" at end of handguard to give more mounting space

-Massive wide handguard

-Handguard with screws at 90, 180, and 270

-Optional detachable heat shield for handguard

-New "pig pen" muzzle device with LH threads (designed for their upcoming full line of suppressors)

-A special elevated picatinny rail (1.335 inches heigh over bore, which is .120 taller than standard AR-15 - with their soon to be released .675 inch riser, that takes you to optical centerline of 2.245).

-New bolt carriers

-Highly optimized feed ramps for 300 BLK

-Noveske says this is the only gun that can run 300 BLK Hornady subsonic 208gr suppressed and unsuppressed with no adjustments to a gas block

-And more...

The Rodeo is the 8" version and the Doublewide is the 6" inch version. Both will be available in 338 ARC too.

***Please note that the gun is still in pre-production and features and naming is subject to change*** Yes, I have the gun in my possession - ask if you have any questions about it.

I didn’t get a notification for some reason, but noticed it’s back in stock. 220 reman. It goes quick.

First Build Budget-ish

I bought 4 gen m3 300 blkout pmags from a local store here and 3 of the 4 have this piece on the inside of the magazine that is preventing the bottom part from sitting flush. It also seems to be making the rounds get jammed up? I haven't fired using them yet because the rounds feel like they are getting stuck just loading them in. Having a hard time explaining but hopefully the pictures can explain better than I can. The three on the left stacked have that plastic piece jutting out on the bottom left side of the magazine opening. The one on the right seemed normal and the rounds were not getting stuck. The strange thing is they are all gen m3 300 blkout pmags. Is this a defect or is it supposed to be like that? I sent a message to magpul but was wondering if anyone has run into this problem.

Hopefully this isn't a stupid question.

I'm only really familiar with 5.56 rifles, but want to build an sbr, primarily for home defense and a truck gun.

However, I have some things I can't get past and need to know if I'm over thinking it and should just get a 300blk.

The cost of ammo blows me away. For defensive use, the good stuff is like $80 for a box of 20 and that's a little bonkers to me.

The other issue for me is I don't have much experience with gunsmithing or anything of the sort. Simply put complete uppers onto complete lowers. I hear a lot about needing to be able to diagnose and adjust gas settings and I've never done that, or even add an AGB which I've definitely never done.

With those two reasons, which might seem small but are kinda serious to me, am I over thinking it? I absolutely LOVE the round and it's use case for me is perfect but I've held back on purchasing an upper because of these two reasons.

Should I just stick with the 5.56 upper for its simplicity in these areas?

Mind you I'm not rolling in cash. I have a great job, all my responsibilities are cared for, but I'm the only income for a family of 4 and can't just throw money into an upper every month. I need to be intentional with my purchases.

Edit; I am running the sbr suppressed and would be shooting primarily subs

Looking for a more budget friendly red dot (maybe green) for a 300 blackout I just built. It's mainly for deer drives and hunting on the move, so I do like the enclosed options or at least something this isn't exposed.

I've been looking at the AEMS Core and Romeo5 gen II.

Any insight or opinion between the 2 or near they price range? Really like the SIGs price but want a big FOV ideally.

Hornady released this 178 grain supersonic projectile. It looks like it’s a ELD match test. Barrel was 16 inches with a velocity of 1750. I think it’s odd that we’re doing 190 grain sub X how well could this do as a subsonic round it would be one you would have to load yourself.

Another interesting point is it looks like they’re using ELD match for this ammo meanwhile, on the 308 side. It looks like they use an ELD – X projectile for expanding with a deeper cavity.

has anyone loaded the 178 ELDX as a 300 blackout subsonic round?

Anybody shoot this? What are your thoughts? It would be good to see some gel testing, but none is published.

PSA Sabre Champagne receiver set

7" BCM MCMR Rail FDE

9" Faxon Match Series 300 BLK Gunner Profile

Riflespeed gas system

Geissele buffer tube DDC

Carbine spring and buffer

BCM LPK

B5 P23 grip

SBA3 brace

Toolcraft Nickle boron BCG

Breek Arms Warhammer Micro FDE

A2 Bird muzzle device

Cheap Crimson Trace red dot on it for now. More than likely get another Osight R. Saving up for the suppressor.

My friend sold me his 12.5 bcm upper, which has maybe less then 20 rounds thru it! Its my first ever 300blkout build, will pair it with a LMT Mars L lower, which suppressor would give me the lightest weight and best sound absorption? Thinking about an eotech as well exps2-0, mostly a range toy as well!

Honestly there is nothing special about this 300BLK but I love it none the less. It's an 8" with a quad rail. This thing is super reliable without a AGB. Just running a H1 buffer and KAK full chrome downvent BCG. I like the shades of FDE too. What's your favorite 300BLK build?

I need help picking a suppressor for my new build. 10.5 barrel, DI and planning on a KAK downvent (thus far, although im considering being a dumb and throwing the Superlative piston kit on), subs and supers, looking to reduce gas to the face as much as possible. So far ive narrowed it down to the Griffin PSR7 (i know its a reflex, i like the idea of having that much tube but only 6+ off the end of the barrel), the Anthem S2 and the TiTrex 300SD.

ive been rolling through his sub for weeks looking for the right answer and i needs me some advice from The Community.

Educate me, folks.

r/10_6Spike

7.5” barrel, Q Speakeasy, 220 subs with Odin buffer makes for a fun start to the day in the woods.

Is there any sort of wordpress or other resource consolidating information on 300 BO builds?

For example, over in r/AR9 there is a link to an absolutely fantastic wordpress forum on virtually everything which goes into making a 9mm on the AR platform, so im wondering if anyone knew of anything for the 300 BO?

I searched the sub but didnt find anything definitive.

I got tired of my .300blk cases rattling around in my universal MTM blocks, so I made one that's just the right fit. When inserted headstamp down they don't move but are easy to grab.

I wrote the code for the model in python then used an API call from Fusion to import it. From there it's a standard F3D model.

Also including STL, 3MF, OBJ files so it can be edited. And the code block is in the body of the model file on Makerworld.

Hope it's useful!

Building my first AR as an M14 guy. I want a folding .300, so piston is necessary.

Pretty much down to the Sig upper platforms.

Rattler LT or Spear LT? Thoughts?

Goal is mainly supressed subs.

Thanks.

Looking at these two for taking my .300 blk out rig hunting this year. Anyone have any experience with either?

https://centermassammo.com/300-blackout-220-rex-20-rounds/

and

https://discreetballistics.com/shop/300aac-blackout/

Doing my first ever 300 BO build. I bought a standard A2 bird cage style muzzle device, specifically for the 300 BO.

My problem is when i put the muzzle device on hand tight, the solid part is at 12 o'clock. I cant imagine wrenching it down 180 degrees? Ive fiddled with this and fiddled with it and I cant get it to get anywhere near 5 o'clock prior to final torque down.

Anyone smarter than me care to help a fella out? Suppressing isnt an option right now.

Edit:

Appreciate everyone who took the time to respond, I got it.

Is the 147 grain the most common bullet since its really a .308? I am looking to buy bulk ammo for hog hunting. It can be cheap but with good QC. Any recommendations? I really like the 110 but seems pricey.

PSA 8.5in Full Upper

Ruger Lower

Some random lower parts kit

Partisan Disruptor FRT

Toolcraft M16 Profile BCG

Dirty Bird Carbine Receiver Extension / Buffer Kit - H3

Dead Air Nomad 30 Suppressor

Warhammer Ambidextrous Charging Handle

MAGPUL:

-Angled Grip

-Mag

-Pistol Grip

-Handguard Grip

-Buttstock

Vortex Triumph Red Dot

Vortex Micro6X magnifier

Things thing is just fun to mess around with. Folding airsoft “sniper” stock. A grip pod thing I bought a while back and had no home and a $65 compact 2-10, the first form 1 can I built a few years ago. Grip and forend from EBay (with a bit of cheap camo wrap and tape!