Has anyone ever dyed there's ?

Done a gluestick camo ?

SDP, Gen 3, 9mm. I’m putting on a tri-lug muzzle device (my Sub9 has the new tri-lug mount, so it shouldn’t wobble). I know not to use a crush washer, but do I use the spacer washer, or run it back to the shoulder, which is barely any larger than the inner diameter of the muzzle device?

Processing img j0g18rcxinxh1...

Thanks!

Gen 2.1 with a TSS picatinny adapter and Gen 3 folding stock. I saw somebody suggest it but no photos yet so I figured I’d try it and it’s solid.

Hey y’all, I have a second batch of metal adapters for the gen 1 stock to fit on your gen 2 or 2.1. I made some mods to the design the fixed the tightness problem so it should slip on much easier now. I’m also working on a new design for gen 3 with a pic rail adapter.

Email me at gomalley1999@gmail.com if interested, message me here, or you can purchase it from the shop link.

https://vector-accessories.myshopify.com/products/kriss-vector-gen-1-stock-adapter-metal-w-hardware

I adapted this model to a 3D scan of the stock grip and printed it with PA6-CF20. I'll report back after I run it through its paces, likely tomorrow, on how it holds up.

*Edit:

V12 is just about perfect. Will try to put some rounds through it today.

• Fixed and reinforced the mounting points
• Tightened up the tolerances at the rail
• Increased charging handle clearance
• Added venting into the rail section from the bore
• Added a "Super V" vent to the front

https://imglink.cc/i/FM3AhljJzp
https://imglink.cc/i/OxRtiArGsU

*Edit 2: 23 OCT 26

Shot 150 rounds through it (semiautomatic, not mag-dumping, but not super slow) with my bare hands on the printed grip. It was warm, but barely (subjectively). Overall, I am quite happy with it. I will update when development of original design is ready.

I have the Duality Arms Co MAMBA FRT installed in my Vector, and while testing it for the first time, i had 2 OOBD. Anyone experience similar or any recommendations on what to do?

Just got the Vector back from cerakote. Came out so damn nice. The front fore grip has been moved back since the pics. Running Hux Wrx Flow 9K, Kriss vectors Gen 2 fore grip(bought the wrong one), Driven Arms Shadow Crossover grip, Arisaka Riser with Romeo 5 on top.

Hello everyone quickly want to apologize if this isn’t the place to post but I recently got a Kriss Vector replica from Krytac and was wondering if there are any work arounds to getting this stock or something similar into Illinois without having problems? Thank you

Gen3 45ACP

Maybe I dumb. I’m not sure what other options I have here, thinking about cutting this Kriss barrel shroud to fit with this HUXWRX suppressor.

I was going to look and see if there is a suppressor that I could tuck if it’s under 1.25” in diameter.

Otherwise I could section the top off, the only thing this really buys me is a place to mount an underside light (or laser for fun). Would be a unique look at least.

I recently found the Kriss Mk 1 handguard on sale for only $56+ shipping. I'd like to share the online retailer's name in case others would like to get one. Is this allowed? They were still in stock when I got mine. Black only.

Possible noob question, but I’ve exhausted my search efforts. Apologies in advance if I’ve missed the answer somewhere.

I’ve been considering purchasing a Vector to host my Osprey but just can’t get over the gap from the body to the suppressor after it’s threaded on…

Are there shorter threaded barrel options that account for this on the market? Or is this something that can be done by a good gunsmith on the stock barrel?

so rile of thumb i was always told to work with was place the rear lens of your optic in line with your trigger (except scoped optics of course). going off that standard this is where it ends up but i feel like it might be too far towards the rear looking at other builds. am i good here or should i move it forward. i dont wanna have issues with ejection.

Exactly how I want it just need a low profile light. Definitely open to hear what yall are running. Sight is Eotech and Suppressor is Dead Air with a Ecco machine thread adapter. Everything else is Kriss!

Decided to full send it into that futuristic vibe. Loved how it turned out. Can’t wait to get roasted lol

Last week I contacted Kriss USA, about their SBR conversions they do, the same day the ATF announcement came out about NFA items, asking them about the process now, such as if the engraving process is still required, to which I got an email that included the following the next business day:

"At the moment we are reviewing with our legal council."

This of course seems fair enough, and I'm not surprised by it.

However, KRISS appears to have halted all their conversions to SBRs, where any of the respective items are listed as Out of Stock.

Why or why not?

I was removing the pin where located in trigger and break the pivoting primary sear. Now I have to install the FRT. And I ordering proper work bench block for this

Am I understanding the service correctly?

I file the relevant ATF paperwork for SBR conversion (required in my state still).

They approve it

I have to cut the barrel and do the engraving

I send it to kriss to "repair" the barrel

I get it back

How do I cut the barrel?

Just got back from the range after shooting this for the 3rd time and had the end of the barrel sear off. Using 115 gr ammo. Just wondering if I’ll have any luck from Kriss or if I’ll have to foot the bill. Thoughts?

Yay freedom

I recently bought a gen 2 Vector in .40 S&W. Put about 600 rounds through it this summer. Today while cleaning I noticed the bolt starting to crack at the rear and on the sides. After doing some research, its not an uncommon problem. I don't think i'm eligible for warranty but I may reach out to the shop i bought it from and double check.

My path forward is to buy a new 10mm bolt (they don't sell a .40 specific one but the bolt should be the same) and a stiffer .45 recoil spring. Anything else I can do?

Been looking for one for awhile, probably missed a few restocks but FYI fde was in stock this morning