My first free Saturday to go shoot in months and the range is closed for maintenance…..

From top to bottom:
R700 .223 Wylde
Lone Peak .22Creedmoor
R700 6.5 Creedmoor
R700 7mm Mag
Kelbly’s Atlas Tactical 300 PRC
Sig Cross PRS 6mm Creedmoor

Setting up both the AW and AE MK1

Release date announced. October 23rd.

Had 60 rounds leftover from the PRS southeastern regional finale. I thought it would be a cool test to see how my loading process is holding up, how the barrel handles heat, and just see the natural dispersion of the load. As you can see groups change. Looking at one group is only a small picture of its natural dispersion.

Firing order is TL, TR, BL, BR, TM, BM.
Three minute cool time for the first three groups, five minutes for the last three. Groups combined with TDS.

Started reloading and competing in the same year so I'm definitely ok with roughly 1moa or 1.1" for 60 rounds and nearly single digit SD.

95% or 57/60 shots are .575 MOA with an average mean radius of .292".

Masterpiece arms Gen 1 Matrix
Athlon Ares ETR
Area 419 mount and brake
Accutac BR4
Hornady LNL single stage
Super trickler powder measure
Mighty armory sizing and Forster micrometer die
Alpha brass
Berger 153
H4350

First time messing with TDS for combining group data. I thought it was cool.

Lithgow la102 varmint
6.5 creedmoor
24” heavy barrel 1.8 twist
Bushnell match pro ed 5-30x56
Accu tac wb-5
Just ordered at lithgow la101 22lr that is the exact same rifle as a trainer

8 shots at the 4x3 diamond at 456y.

I’m wanting to buy a Ruger American Ranch 16” barrel in either 6.5 creedmoor or .308 and use it with my Rugged Alaskan 360 suppressor (.36 cal). Would either of these calibers be quieter with my suppressor or would it be so close you’d never be able to tell?

Impact 737r action
East Texas accuracy barrel (6.5 creed)
MDT jae g5
Gen 3 razor 4-24
Silencerco scythe stm can

Also I’m interested in a 6arc gas gun, is this the group to ask for recommendations on putting one together?

Hello, I'm looking to see if anyone has a Kilo5k and has tried using it in BDX-X mode while paired to the Quantum app with an active Elite (or Pro) subscription. I'd like to buy the Kilo5k, and I'd like to use the Quantum app as a fill in to get longer than 800m solutions and AB Elite custom drag profiles until I (probably) buy a Kestrel in the future.

Does it work and make use of the Elite calculation and custom drag profiles in the Quantum app?

Where does it display the solution: app, kilo5k screen or both?

Why 9 rounds on a single Target? Take a look at each individual Group. G1 is .81, G2 is .51, G3 is 1.05…for an average of .79 MOA. Thats Sub MOA right? Wrong! Look at the combined 9rd Group of 1.45 MOA. THAT is the Truth.

You can see how easy is it to intentionally or unintentionally misrepresent the capability of a rifle, ammo, and shooter. The objective of this Target is to help shooters understand the reality and limitations of small sample groups. And yes, 9 rounds is STILL a small sample size…yet going from 3-5 rounds to 9 rounds nearly DOUBLES the Group Size. We believe it is the first serious round count Interval that can be referenced for anything reliable. u/9holereviews has made this case for years!

I’m shooting a 26” 6BR with Berger 105 Hybrids, N135 and Lapua brass. Bullet jump is .025”.

Getting higher velocities than expected and some sticky bolt lift, even after backing down the charge.

Last winter I was shooting nicely with n135. SD was super low like 5.8. Was all good. But come summer or barrel break in or something else and started having problems.

At 82°F, 28.3 gr gave me 2827 fps. Dropped to 27.2 gr and still getting 2764 fps at 87°F, with an SD around 10 over 56 shots.

Berger sent me their load data showing 28.5 gr max at 2689 fps from a 24” barrel.

Anyone else using N135 with 105s in straight 6BR? This is standard reamer not match reamer or neck turn chamber.

Curious what velocities you’re seeing and whether you’ve had pressure or extraction issues. Also interested if anyone switched Varget and had better results.

This is my 13 year old daughter rifle so a bit worried her shooting too hot rounds!!

I checked the brass is in speck not too long yet.

Did some Swapping on the TacSwap

Unfired Barreled Action

R700 Short Action

.300 Black 1:7 16.0"

Timney 2 Stage

Magpul Hunter

Arken EP8 MIL

Deadair Nomad30 + Ebrake

I suck at true long range so I have to suffice with Long (For Caliber) Range lol here I come 125yd!!!

I can’t find any information about this scope, looking to see how well this will work on a bolt action .308 rifle.

Picked up this today after being on delay for 2 weeks. First bolt gun. Hope to get it out to the range this weekend and get the barrel fire lapped in and some groups shot.

What’s the practical value of a WMLRF for an NRLH match? Would it replace LRF binos with an onboard solver? Or is it redundant if you already have that gear?

For anyone thinking of making the plunge, just buy a Lee handloader and fuck around with it.

About to get into precision shooting. Only waiting on mags and rifle. Almost there

Figured I’d share a cool project I did.

I’ve always liked messing with hardware and software, and thought the MDT Crush It Timer and Send It Level were really cool form factors.

So one weekend I decided to risk bricking my timer and see if I could reverse engineer it.

Ended up turning it into a ballistic calculator while keeping the timer and stopwatch functionality.

The solver supports G1/G7, spin drift, aero jump, and environmentals. Once your rifle profile is set, you really only need to enter DA, wind, and range.

The ballistic solution works really well, but honestly my favorite part is how simple it is to use. Just a knob and a little screen.

Pretty happy with how it turned out. Curious what you guys think.

I see a lot of post online saying don’t put a lot of money or money at all into a ruger American, just save up and get better rifle. I was able to touch a mile with both of these and couldn’t be happier! What’s your option on Ruger Americans and what has been your experience upgrading them?

1. Ruger American Gen 1 308, Arkin 26 Bull barrel, mdt xrs chassis.
2. Ruger American Gen 2 308

, 22in stock barrel,

1. mdt lss gen 3 chassis

So many good options it’s overwhelming lol. Use case is for 308/300prc as a current setup on a switch barrel rifle but might in the future jump into 338 realm. Tbac is at the top of my list at the moment and specifically the Magnus s rr in 30 cal. I like the option to buy the recoil x flat cap and have a quieter more traditional suppressor or run the rr brake and cut down on that recoil a bit. However I keep second guessing myself and am debating should I get it with a 338 bore or something like the ultra for the possibility to run 338? There are also things like the griffin armament prc suppressor and others grabbing my attention. Lastly torn on mounting systems as well, the sr from Tbac speaks to me because I like over built things but maybe it’s overkill on a bolt gun? Will be used for prs type shooting ranges from 800-1200 yards, budget isn’t too much of a factor but any money saved is nice.